Mining Academy

Connect to the pool

Best ASIC miner 2026: how to choose and what to buy

There is no single "best ASIC": the right model depends on the coin, your electricity price, where the unit will be placed and your budget. In 2026, look first at energy efficiency (J/TH for Bitcoin and J/MH for Litecoin and Dogecoin), then at noise, service and repair availability, and cost per unit of hashrate.

Criteria for choosing an ASIC

Before comparing specific models, decide which parameters you will judge them by. The most important ones are:

  • Energy efficiency. How much electricity the device uses per unit of hashrate: J/TH for SHA-256, J/MH for Scrypt. The lower the number, the better, and the better your odds of staying profitable when the price drops or difficulty rises.
  • Hashrate and absolute power draw. A powerful device needs serious wiring: most modern ASICs draw 3 kW or more. Make sure your circuit and breaker can handle it.
  • Price per unit of hashrate. Cost per terahash or gigahash matters more than the sticker price. Compare what hashrate you get for your money, not the price tags.
  • Noise. Air cooling produces roughly 75-85 dB near the unit. That is unacceptable in an apartment but fine in a warehouse or data centre. Liquid- or immersion-cooled models are quieter but need dedicated infrastructure.
  • Service and spare parts. Hashboards, fans and power supplies fail. Check whether workshops in your region can repair that exact model and whether parts are available. See ASIC repair.
  • Firmware and compatibility. Make sure the device works with the Stratum protocol and a standard pool setup, and that stock or third-party firmware does not cause trouble.
  • Manufacturer reputation. Look at support, firmware updates, warranty length and owner feedback.

Bitcoin (SHA-256) ASICs: three classes

Bitcoin devices fall into three rough classes by efficiency. The numbers below are manufacturers' rated values, given as a guide; real figures depend on mode, temperature and firmware, so check the current specification on the manufacturer's site before buying.

ClassExamplesEfficiency guideWho it suits
Previous generationAntminer S19 and similarabout 30-38 J/THOnly with very cheap electricity and a low device price
Mid-rangeAntminer S21, Whatsminer M60Sabout 17-19 J/THA balanced choice at normal tariffs
Top tierAntminer S21 Pro and S21 XP, newer Whatsminer and Avalon modelsabout 13-15 J/THFor those who count every kilowatt

For reference, the manufacturer rates the Antminer S21 at about 200 TH/s at roughly 3.5 kW, and the S21 XP at about 270 TH/s at around 13.5 J/TH. The Whatsminer M60S sits in the same efficiency class as the base S21. These are guides, not guarantees: check the datasheet of the specific revision. Manufacturers release new models regularly, so by the time you read this the top tier may include more efficient machines.

The main takeaway for SHA-256 is that the efficiency gap between classes can be twofold or more, so your electricity tariff determines which class suits you. With expensive power, old hardware loses money even if it is nearly free.

Litecoin and Dogecoin (Scrypt) ASICs

Litecoin and Dogecoin are mined by the same device thanks to merged mining: a Scrypt ASIC connects to the LTC stratum, and DOGE is credited as a separate coin on top of LTC. The Scrypt lineup is narrower than SHA-256 and splits into two generations.

  • Previous generation. Antminer L7: about 9.05 to 9.5 GH/s depending on the version, at roughly 3.4 kW, or about 0.36 to 0.38 J/MH. It was the standard for a long time and now appears mostly on the secondary market.
  • New generation. Antminer L9: rated by the manufacturer at about 16 GH/s at roughly 3.36 kW (a 17 GH/s version also exists), or about 0.21 J/MH. Substantially more efficient than its predecessor.

Other manufacturers also make Scrypt devices, but the choice comes down to the same criteria: efficiency, availability in your region and service. As with Bitcoin, verify the figures against the current spec. More about how the pool handles Scrypt is on the LTC mining page.

Cooling type: air, hydro, immersion

Most ASICs sold today are air-cooled: two to four powerful fans push air through the hashboard heatsinks. That is the simplest to maintain and the cheapest to buy, but it is loud and needs cold air in and hot air out. Hydro models use water blocks and connect to an external loop; they are quieter and allow denser installation, but need pumps, heat exchangers and trained staff. Immersion cooling, where the board sits in dielectric fluid, needs no fans at all and allows careful overclocking, but it suits professional sites better than a private miner. For a first farm of 1-10 units, an air-cooled model in a well-ventilated room or in a data centre, where the operator handles cooling, is almost always the sensible choice.

Also consider underclocking and power modes. Many modern ASICs support power profiles: lowering power costs some hashrate but often improves J/TH and noise. If your tariff is high, such a mode can be more profitable than the nominal one. Check that the stock firmware supports it and follow the manufacturer's guidance so you do not shorten the board's life.

New or used hardware

A new ASIC costs more but comes with a warranty, fresh fans and predictable hashboard condition. A used unit can be much cheaper per unit of hashrate, but it is the riskiest part of the decision. You need to check runtime, logs, temperatures and board condition, or the savings will turn into repairs. How to do this is covered in how to buy and inspect a used ASIC, and current offers are on the used equipment market.

A simple rule: the older the generation, the more you depend on cheap electricity. If your tariff is high, saving on the device price will not offset the extra spent on power.

Check the economics before you buy

Do not rely on the attractive "daily income" figure in a listing. It is calculated for one moment and one difficulty level. Run your own numbers:

  1. Open the profitability calculator and enter the hashrate and power draw of the model.
  2. Enter your real price per kilowatt-hour including all surcharges, or the hosting tariff if the unit will be in a data centre.
  3. Account for the pool fee and add a reserve for downtime and repairs.
  4. Run several scenarios: higher difficulty, lower price, higher tariff. If the model goes negative in a bad scenario, choose a more efficient model or cheaper placement.
  5. Treat payback as a range, not a single number.

Also assess total cost of ownership: on top of the device price come electricity over its whole life, maintenance, spare fans and power supplies. Sometimes a model that costs 15-20% more upfront repays the difference within a year through lower consumption. Compare options by total cost over a chosen horizon, say two years, not by the price on the day of purchase.

Remember: a calculator result is a calculation on current parameters, not a forecast or a promise. Mining carries risk: price, network difficulty and electricity costs can change. Only spend on hardware money you can afford to lose.

Practical buying tips

  • Buy from sellers with a verifiable reputation or official distributors; for used units, ask for a startup video and log screenshots.
  • Check the power requirements: air-cooled models usually run on single-phase 220 to 240 V, while some hydro and immersion models need 380 V three-phase power.
  • Budget for delivery, ventilation, cables, PDUs and cooling; these can add up to a noticeable share of cost.
  • Decide in advance where the unit will stand. If home is not an option, consider data centre hosting.

FAQ

Which ASIC is best to buy in 2026?

There is no universal answer. For Bitcoin people usually choose from the mid and top efficiency classes; for Litecoin and Dogecoin, a new-generation Scrypt ASIC. The deciding factors are your electricity tariff, placement conditions and budget.

Can I mine Bitcoin and Litecoin on one ASIC?

No. SHA-256 and Scrypt are different algorithms and a device is built for one of them. Litecoin and Dogecoin, however, are mined together on a single Scrypt ASIC through merged mining.

Are older models worth buying?

Only if electricity is very cheap and the unit costs much less than a new one per unit of hashrate. Always assess noise, repairability and remaining lifespan.

Should service availability affect my choice?

Yes. Availability of repair and parts directly affects downtime. Even an efficient unit that sits for weeks waiting for a part earns less than a slightly less efficient one that is serviced quickly.