Antminer L7

LTC and DOGE mining (merged mining) on the RuPool pool · 9.5 GH/s, 3,425 W

≈ $3.36/day · covers power up to $0.041/kWh

Start mining

After sign-up your cabinet opens a step-by-step connection guide.

Specifications

ModeHashratePowerEfficiency
Antminer L7 9.5 GH/sprimary9.5 GH/s3,425 W360.5 J/GH
Antminer L7 9.3 GH/s9.3 GH/s3,350 W360.2 J/GH
Antminer L7 9.05 GH/s9.05 GH/s3,260 W360.2 J/GH
Manufacturer
Bitmain
Algorithm
Scrypt
Cooling
Air
Release year
2021
Noise level
75 dB
Voltage
200–240
Dimensions
370 × 195 × 290 mm
Weight
13.5 kg

Specification source

Profitability

ModeMined per dayRevenue per dayRevenue per monthPower useCovers power
Antminer L7 9.5 GH/s0.01200573 LTC48.4959059 DOGE$3.36$100.6882.2 kWhup to $0.041/kWh
Antminer L7 9.3 GH/s0.01175297 LTC47.47493946 DOGE$3.29$98.5680.4 kWhup to $0.041/kWh
Antminer L7 9.05 GH/s0.01143703 LTC46.19873141 DOGE$3.20$95.9178.2 kWhup to $0.041/kWh

LTC and DOGE are mined at the same time on the same hashrate (merged mining) — the income adds up.

Net profit, mode “Antminer L7 9.5 GH/s”

TariffProfit per dayProfit per month
$0.05/kWh-$0.75-$22.62
$0.08/kWh-$3.22-$96.60
$0.12/kWh-$6.51-$195.24

Calculated on 18 November 2026. Pool fee included. Rate: 1 LTC = $43.68, 1 DOGE = $0.05839.

Precise estimate in the profitability calculator

RuPool setup

Pool address, login and password to connect Antminer L7.

Recommended address — automatic location pick with failover

stratum+tcp://enter.rupool.pro:3334
Other ports (if the main one is blocked by your ISP)
stratum+tcp://enter.rupool.pro:8889
stratum+tcp://enter.rupool.pro:444
stratum+tcp://enter.rupool.pro:26
stratum+ssl://enter.rupool.pro:998
Addresses by location

Moscow (whitelist)

stratum+tcp://msk-ru.enter.rupool.pro:3334
Other ports (if the main one is blocked by your ISP)
stratum+tcp://msk-ru.enter.rupool.pro:8889
stratum+tcp://msk-ru.enter.rupool.pro:444
stratum+tcp://msk-ru.enter.rupool.pro:26
stratum+ssl://msk-ru.enter.rupool.pro:998

Moscow

stratum+tcp://msk2-ru.enter.rupool.pro:3334
Other ports (if the main one is blocked by your ISP)
stratum+tcp://msk2-ru.enter.rupool.pro:8889
stratum+tcp://msk2-ru.enter.rupool.pro:444
stratum+tcp://msk2-ru.enter.rupool.pro:26
stratum+ssl://msk2-ru.enter.rupool.pro:998

Novosibirsk

stratum+tcp://nsk-ru.enter.rupool.pro:3334
Other ports (if the main one is blocked by your ISP)
stratum+tcp://nsk-ru.enter.rupool.pro:8889
stratum+tcp://nsk-ru.enter.rupool.pro:444
stratum+tcp://nsk-ru.enter.rupool.pro:26
stratum+ssl://nsk-ru.enter.rupool.pro:998

Helsinki

stratum+tcp://hel-fi.enter.rupool.pro:3334
Other ports (if the main one is blocked by your ISP)
stratum+tcp://hel-fi.enter.rupool.pro:8889
stratum+tcp://hel-fi.enter.rupool.pro:444
stratum+tcp://hel-fi.enter.rupool.pro:26
stratum+ssl://hel-fi.enter.rupool.pro:998

Almaty

stratum+tcp://ala-kz.enter.rupool.pro:3334
Other ports (if the main one is blocked by your ISP)
stratum+tcp://ala-kz.enter.rupool.pro:8889
stratum+tcp://ala-kz.enter.rupool.pro:444
stratum+tcp://ala-kz.enter.rupool.pro:26
stratum+ssl://ala-kz.enter.rupool.pro:998
Login (worker):own.ltc2

Format: <subaccount>.<worker>. Get your subaccount in the cabinet.

Password:anything

Connect to the LTC stratum — DOGE is credited automatically (merged mining). No separate DOGE address or wallet is needed to connect.

How to set up Antminer L7 on the pool

  1. Find the miner IP

    Find the ASIC IP address in your router's DHCP client list, or press the IP Report button on the miner itself.

  2. Open the web interface

    Enter the IP address in a browser on a computer on the same network.

  3. Log in to the panel

    Default login and password on stock firmware are root / root.

  4. Open the pool settings

    Go to Miner Configuration → General Settings, the Pool 1, Pool 2, Pool 3 block.

  5. Fill in the pool addresses

    Pool 1 — the recommended address (auto-select), Pool 2 and Pool 3 — two nearest locations. Worker — your login in the form subaccount.worker, Password — anything.

  6. Save and check

    Press Save & Apply, wait for the restart and check share submission on the Miner Status tab; accruals appear in the cabinet.

Launched in late 2021, the Antminer L7 was the machine most Litecoin farms were built on, and plenty are still hashing. Today it is mostly a second-hand purchase: cheap per GH/s, well documented, with spare hashboards and PSUs easy to source.

The catch is efficiency. At about 360 J/GH the L7 burns noticeably more power per gigahash than the L9 or L11, so its margin depends heavily on your price per kWh. With cheap power it is still a sensible entry into Scrypt mining.

On RuPool the L7 connects to the LTC stratum and Dogecoin is merge-mined automatically, credited at its own FPPS rate. The live USD estimate above covers both coins.

The 9.05, 9.3 and 9.5 GH/s versions share one chassis and differ only by chip bin. Efficiency is the same across bins, so a higher bin simply means more hashrate and proportionally more power.

Power comes from an APW12 supply rated for 200–240 V input; 120 V is not supported. At about 3.4 kW the L7 uses around 80 kWh per day, so at your local rate the daily power bill is easy to estimate. Give each unit its own 240 V circuit sized for continuous load.

Four fans push about 75 dB, and the rated intake range is 0–40 °C. On used units, dust is the main enemy: blow out the heatsinks, check fan bearings and watch board temperatures for the first day after installation.

Run stock Bitmain firmware updated to the latest release from Bitmain's site. Third-party firmware with low-power profiles is common on the L7; whether to use it is your decision, especially since used units are usually out of warranty.

Frequently asked questions

Is the Antminer L7 still profitable?

That depends on your electricity price, network difficulty and LTC and DOGE prices. The live FPPS estimate at the top of this page updates automatically; compare it with about 80 kWh per day times your rate.

How much power does the Antminer L7 draw?

About 3260 W for the 9.05 GH/s bin, 3350 W for 9.3 GH/s and 3425 W for 9.5 GH/s at the wall.

How do I add an L7 to RuPool?

In the Antminer web UI enter the RuPool LTC stratum URL for your region shown above (or the auto address with failover), worker name subaccount.worker and any password. Save, and the worker appears in your dashboard within a few minutes.

Does the L7 mine Dogecoin too?

Yes, through merged mining. You only configure the LTC stratum; DOGE is credited automatically at its own rate with no extra pool or address on the miner.

L7 vs L9: what do I gain by upgrading?

The L9 delivers nearly double the hashrate at similar wall power, about 210 J/GH versus 360 J/GH. If power is your main cost, the upgrade pays back faster; if power is cheap, the L7 keeps its edge on purchase price.

What should I check before buying a used L7?

All three hashboards detected and hashing, no fan or temperature errors in the kernel log, and a PSU that runs without unusual noise or burnt smell. Ask to see it under load for at least 30 minutes.

Connect Antminer L7 to RuPool

Sign up — your cabinet opens a step-by-step guide: create a subaccount, set a payout address and enter the stratum address in the miner.

Daily payouts, 1% FPPS fee, 24/7 support.

Start mining