Whatsminer M60S

BTC mining on the RuPool pool · 186 TH/s, 3,441 W

≈ $5.34/day · covers power up to $0.065/kWh

Start mining

After sign-up your cabinet opens a step-by-step connection guide.

Specifications

ModeHashratePowerEfficiency
Whatsminer M60S 186 TH/sprimary186 TH/s3,441 W18.5 J/TH
Whatsminer M60S 180 TH/s180 TH/s3,330 W18.5 J/TH
Whatsminer M60 172 TH/s172 TH/s3,423 W19.9 J/TH
Whatsminer M60 168 TH/s168 TH/s3,343 W19.9 J/TH
Manufacturer
MicroBT
Algorithm
SHA-256
Cooling
Air
Release year
2023
Noise level
75 dB
Voltage
220–240
Dimensions
430 × 155 × 226 mm
Weight
13.5 kg

Specification source

Profitability

ModeMined per dayRevenue per dayRevenue per monthPower useCovers power
Whatsminer M60S 186 TH/s0.00008545 BTC$5.34$160.3182.6 kWhup to $0.065/kWh
Whatsminer M60S 180 TH/s0.00008269 BTC$5.17$155.1479.9 kWhup to $0.065/kWh
Whatsminer M60 172 TH/s0.00007901 BTC$4.94$148.2582.2 kWhup to $0.06/kWh
Whatsminer M60 168 TH/s0.00007718 BTC$4.83$144.8080.2 kWhup to $0.06/kWh

Net profit, mode “Whatsminer M60S 186 TH/s”

TariffProfit per dayProfit per month
$0.05/kWh$1.21$36.44
$0.08/kWh-$1.26-$37.89
$0.12/kWh-$4.57-$136.99

Calculated on 18 November 2026. Pool fee included. Rate: 1 BTC = $62,539.90.

Precise estimate in the profitability calculator

RuPool setup

Pool address, login and password to connect Whatsminer M60S.

Recommended address — automatic location pick with failover

stratum+tcp://enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://enter.rupool.pro:8888
stratum+tcp://enter.rupool.pro:443
stratum+tcp://enter.rupool.pro:25
stratum+ssl://enter.rupool.pro:999
Addresses by location

Moscow (whitelist)

stratum+tcp://msk-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://msk-ru.enter.rupool.pro:8888
stratum+tcp://msk-ru.enter.rupool.pro:443
stratum+tcp://msk-ru.enter.rupool.pro:25
stratum+ssl://msk-ru.enter.rupool.pro:999

Moscow

stratum+tcp://msk2-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://msk2-ru.enter.rupool.pro:8888
stratum+tcp://msk2-ru.enter.rupool.pro:443
stratum+tcp://msk2-ru.enter.rupool.pro:25
stratum+ssl://msk2-ru.enter.rupool.pro:999

Novosibirsk

stratum+tcp://nsk-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://nsk-ru.enter.rupool.pro:8888
stratum+tcp://nsk-ru.enter.rupool.pro:443
stratum+tcp://nsk-ru.enter.rupool.pro:25
stratum+ssl://nsk-ru.enter.rupool.pro:999

Helsinki

stratum+tcp://hel-fi.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://hel-fi.enter.rupool.pro:8888
stratum+tcp://hel-fi.enter.rupool.pro:443
stratum+tcp://hel-fi.enter.rupool.pro:25
stratum+ssl://hel-fi.enter.rupool.pro:999

Almaty

stratum+tcp://ala-kz.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://ala-kz.enter.rupool.pro:8888
stratum+tcp://ala-kz.enter.rupool.pro:443
stratum+tcp://ala-kz.enter.rupool.pro:25
stratum+ssl://ala-kz.enter.rupool.pro:999
Login (worker):own.152

Format: <subaccount>.<worker>. Get your subaccount in the cabinet.

Password:anything

How to set up Whatsminer M60S on the pool

  1. Find the miner IP

    Find the Whatsminer IP in the router's client list or via the WhatsMinerTool utility.

  2. Open the web interface

    Enter the IP address in a browser; default login and password are admin / admin.

  3. Open the pool settings

    Go to Configuration → Pools (CGMiner configuration).

  4. Fill in the pool addresses

    Pool 1 — the recommended address (auto-select), Pool 2 and Pool 3 — two nearest locations. Worker — a login in the form subaccount.worker, Password — anything.

  5. Save and restart

    Press Save/Apply and wait for the miner to restart; check the status in the panel and accruals in the cabinet.

The Whatsminer M60 and M60S are MicroBT's current-class air-cooled Bitcoin miners, introduced in late 2023. The M60 is rated around 19.9 J/TH and the M60S around 18.5 J/TH, putting them in the same efficiency league as Bitmain's S21 generation.

For operators without three-phase power, the M60S is one of the more practical modern options: an integrated 220–240 V supply, a single C19 cord and the same chassis dimensions as the M50, so existing racks and ducting usually fit.

On RuPool the M60 and M60S mine Bitcoin (SHA-256) and are paid FPPS on every accepted share, so revenue follows hashrate rather than block luck.

Each unit draws roughly 3.3 to 3.5 kW through a built-in P221B/P222B supply rated for 220–240 V. In the US or Canada that means a dedicated 240 V circuit sized for continuous load, one miner per circuit.

MicroBT rates the M60 series for −5 to 35 °C ambient and does not support adding extra fans. Two fans produce about 75 dB, so hot climates need serious exhaust capacity and winter setups should keep snow and condensation out of the intake.

The M60S improves on the M60 by about 1.4 J/TH. The later M60S+ and M60S++ go further, and hydro variants exist as separate models. Against an Antminer T21 the M60S is slightly more efficient and, crucially, single-phase.

Pool settings, firmware updates and error codes are available in the web interface and in MicroBT's WhatsMinerTool. Stock MicroBT firmware is recommended as the baseline; RuPool accepts any firmware using standard stratum.

Frequently asked questions

Whatsminer M60 vs M60S: which should I choose?

The M60S is more efficient, around 18.5 J/TH versus about 19.9 J/TH for the M60, with the same chassis and power supply. At equal hashrate it costs less to run; the M60 makes sense only at a meaningfully lower price.

How much does a Whatsminer M60S earn per day in USD?

It depends on network difficulty and the Bitcoin price. The live FPPS estimate at the top of this page is recalculated automatically for the variant you select.

What does an M60S cost to run per day?

A 186 TH/s unit at about 3441 W uses around 83 kWh per day. Multiply by your electricity rate per kWh to get the daily cost.

Does the M60S need three-phase power?

No. It runs on 220–240 V single-phase with a C19 cord rated 16 A or more. That is its main practical advantage over three-phase-only miners like the Antminer T21.

How do I configure the stratum URL on an M60S?

Open the miner's IP in a browser or use WhatsMinerTool, go to the pool settings, enter a RuPool stratum address from this page, set the worker as subaccount.worker and any password, then save and restart if prompted.

What ambient temperature can the M60S handle?

MicroBT specifies −5 to 35 °C. Above that the miner protects itself by throttling or stopping, so plan exhaust and intake airflow for your hottest days.

Connect Whatsminer M60S to RuPool

Sign up — your cabinet opens a step-by-step guide: create a subaccount, set a payout address and enter the stratum address in the miner.

Daily payouts, 1% FPPS fee, 24/7 support.

Start mining