Antminer S21 XP

BTC mining on the RuPool pool · 270 TH/s, 3,645 W

≈ $7.76/day · covers power up to $0.089/kWh

Start mining

After sign-up your cabinet opens a step-by-step connection guide.

Specifications

ModeHashratePowerEfficiency
Antminer S21 XP 270 TH/sprimary270 TH/s3,645 W13.5 J/TH
Manufacturer
Bitmain
Algorithm
SHA-256
Cooling
Air
Release year
2024
Noise level
76 dB
Voltage
220–277
Dimensions
449 × 219 × 293 mm
Weight
18.7 kg

Specification source

Profitability

ModeMined per dayRevenue per dayRevenue per monthPower useCovers power
Antminer S21 XP 270 TH/s0.00012361 BTC$7.76$232.9087.5 kWhup to $0.089/kWh

Net profit, mode “Antminer S21 XP 270 TH/s”

TariffProfit per dayProfit per month
$0.05/kWh$3.39$101.68
$0.08/kWh$0.77$22.95
$0.12/kWh-$2.73-$82.03

Calculated on 19 November 2026. Pool fee included. Rate: 1 BTC = $62,803.50.

Precise estimate in the profitability calculator

RuPool setup

Pool address, login and password to connect Antminer S21 XP.

Recommended address — automatic location pick with failover

stratum+tcp://enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://enter.rupool.pro:8888
stratum+tcp://enter.rupool.pro:443
stratum+tcp://enter.rupool.pro:25
stratum+ssl://enter.rupool.pro:999
Addresses by location

Moscow (whitelist)

stratum+tcp://msk-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://msk-ru.enter.rupool.pro:8888
stratum+tcp://msk-ru.enter.rupool.pro:443
stratum+tcp://msk-ru.enter.rupool.pro:25
stratum+ssl://msk-ru.enter.rupool.pro:999

Moscow

stratum+tcp://msk2-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://msk2-ru.enter.rupool.pro:8888
stratum+tcp://msk2-ru.enter.rupool.pro:443
stratum+tcp://msk2-ru.enter.rupool.pro:25
stratum+ssl://msk2-ru.enter.rupool.pro:999

Novosibirsk

stratum+tcp://nsk-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://nsk-ru.enter.rupool.pro:8888
stratum+tcp://nsk-ru.enter.rupool.pro:443
stratum+tcp://nsk-ru.enter.rupool.pro:25
stratum+ssl://nsk-ru.enter.rupool.pro:999

Helsinki

stratum+tcp://hel-fi.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://hel-fi.enter.rupool.pro:8888
stratum+tcp://hel-fi.enter.rupool.pro:443
stratum+tcp://hel-fi.enter.rupool.pro:25
stratum+ssl://hel-fi.enter.rupool.pro:999

Almaty

stratum+tcp://ala-kz.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://ala-kz.enter.rupool.pro:8888
stratum+tcp://ala-kz.enter.rupool.pro:443
stratum+tcp://ala-kz.enter.rupool.pro:25
stratum+ssl://ala-kz.enter.rupool.pro:999
Login (worker):own.5

Format: <subaccount>.<worker>. Get your subaccount in the cabinet.

Password:anything

How to set up Antminer S21 XP on the pool

  1. Find the miner IP

    Find the ASIC IP address in your router's DHCP client list, or press the IP Report button on the miner itself.

  2. Open the web interface

    Enter the IP address in a browser on a computer on the same network.

  3. Log in to the panel

    Default login and password on stock firmware are root / root.

  4. Open the pool settings

    Go to Miner Configuration → General Settings, the Pool 1, Pool 2, Pool 3 block.

  5. Fill in the pool addresses

    Pool 1 — the recommended address (auto-select), Pool 2 and Pool 3 — two nearest locations. Worker — your login in the form subaccount.worker, Password — anything.

  6. Save and check

    Press Save & Apply, wait for the restart and check share submission on the Miner Status tab; accruals appear in the cabinet.

The S21 XP sits at the top of Bitmain's air-cooled S21 range: 270 TH/s for 3,645 W, or 13.5 J/TH. It draws about the same power as a first-generation S21 yet hashes more than a third faster, which made it the default pick for new air-cooled deployments through 2024 and 2025.

Efficiency is what you pay for. Every difficulty adjustment squeezes margins, and machines above 17 J/TH reach their break-even power price first. At 13.5 J/TH the XP keeps a wider margin on the same tariff, which matters most if you pay residential or commercial rates rather than industrial ones.

On RuPool it mines Bitcoin under FPPS with a 1% fee. The revenue figure at the top of this page is calculated from the live FPPS rate for the XP's rated hashrate and shown in USD.

Chassis and thermals. The XP shares the larger S21 Pro chassis: 449 × 219 × 293 mm, 18.7 kg net. Rated noise is 76 dBA at 30 °C. Like any air-cooled ASIC it downclocks when intake air gets too hot, so stay well below the 45 °C limit and keep exhaust from looping back.

Electrical. Single-phase 220–277 V AC input. At 230 V expect roughly 16 A continuous; in North America use a dedicated 240 V circuit sized for continuous load. Daily consumption is about 87.5 kWh, the number to multiply by your tariff.

XP vs Pro vs Hydro vs S23. Versus the S21 Pro: 270 vs 234–245 TH/s and better efficiency for roughly 135 W more. Versus the S21 Hyd: no liquid loop or 380 V supply, and better efficiency than its 16 J/TH. Versus the S23: the newer generation reaches about 11 J/TH, so the XP now competes mainly on availability and price.

Firmware. Stock Bitmain firmware works with RuPool as is. Aftermarket firmware can cap power or tune frequencies; we do not recommend any specific one, and none is needed to mine here.

Frequently asked questions

Is the Antminer S21 XP still profitable in 2026?

That depends on difficulty, the BTC price and your power cost. Check the live FPPS revenue in USD at the top of this page and subtract about 87.5 kWh per day times your rate.

What is the daily power cost of an S21 XP?

3.645 kW × 24 h is about 87.5 kWh per day. Multiply that by your price per kWh; Bitmain allows a ±5% tolerance on wall power.

S21 XP vs S21 Pro: is the upgrade worth it?

The XP gives 15–35 TH/s more for a similar power draw and 13.5 instead of 15 J/TH. On cheap power the Pro's lower price can win; on higher rates the XP usually pays for the difference faster. Compare both pages with your own kWh price.

What pool settings does the S21 XP need?

A stratum URL from this page, a worker name in the form subaccount.worker and any password. Fill the two backup slots with another region or the failover auto-address.

Why does my S21 XP show less than 270 TH/s on the pool?

Bitmain allows ±3% on hashrate, hot intake air triggers downclocking, and pool-side hashrate is an average that includes restarts. Compare the 24-hour average with the miner's own reading and check intake temperature.

Can the S21 XP run on 120 V?

No. It needs 220–277 V AC; in the US and Canada that means a 240 V circuit.

Connect Antminer S21 XP to RuPool

Sign up — your cabinet opens a step-by-step guide: create a subaccount, set a payout address and enter the stratum address in the miner.

Daily payouts, 1% FPPS fee, 24/7 support.

Start mining