Elphapex DG1

LTC and DOGE mining (merged mining) on the RuPool pool · 14 GH/s, 3,920 W

≈ $4.86/day · covers power up to $0.052/kWh

Start mining

After sign-up your cabinet opens a step-by-step connection guide.

Specifications

ModeHashratePowerEfficiency
Elphapex DG1+ 14 GH/sprimary14 GH/s3,920 W280 J/GH
Elphapex DG1 11 GH/s11 GH/s3,420 W310.9 J/GH
Elphapex DG Home 1 2.1 GH/s2.1 GH/s630 W300 J/GH
Manufacturer
Elphapex
Algorithm
Scrypt
Cooling
Air
Release year
2024
Noise level
75 dB
Voltage
200–240
Dimensions
432 × 196 × 287 mm
Weight
18.3 kg

Specification source

Profitability

ModeMined per dayRevenue per dayRevenue per monthPower useCovers power
Elphapex DG1+ 14 GH/s0.0176693 LTC69.49064647 DOGE$4.86$145.6694.1 kWhup to $0.052/kWh
Elphapex DG1 11 GH/s0.01388302 LTC54.59979366 DOGE$3.81$114.4582.1 kWhup to $0.046/kWh
Elphapex DG Home 1 2.1 GH/s0.0026504 LTC10.42359697 DOGE$0.73$21.8515.1 kWhup to $0.048/kWh

LTC and DOGE are mined at the same time on the same hashrate (merged mining) — the income adds up.

Net profit, mode “Elphapex DG1+ 14 GH/s”

TariffProfit per dayProfit per month
$0.05/kWh$0.15$4.54
$0.08/kWh-$2.67-$80.13
$0.12/kWh-$6.43-$193.03

Calculated on 19 November 2026. Pool fee included. Rate: 1 LTC = $44.17, 1 DOGE = $0.05864.

Precise estimate in the profitability calculator

RuPool setup

Pool address, login and password to connect Elphapex DG1.

Recommended address — automatic location pick with failover

stratum+tcp://enter.rupool.pro:3334
Other ports (if the main one is blocked by your ISP)
stratum+tcp://enter.rupool.pro:8889
stratum+tcp://enter.rupool.pro:444
stratum+tcp://enter.rupool.pro:26
stratum+ssl://enter.rupool.pro:998
Addresses by location

Moscow (whitelist)

stratum+tcp://msk-ru.enter.rupool.pro:3334
Other ports (if the main one is blocked by your ISP)
stratum+tcp://msk-ru.enter.rupool.pro:8889
stratum+tcp://msk-ru.enter.rupool.pro:444
stratum+tcp://msk-ru.enter.rupool.pro:26
stratum+ssl://msk-ru.enter.rupool.pro:998

Moscow

stratum+tcp://msk2-ru.enter.rupool.pro:3334
Other ports (if the main one is blocked by your ISP)
stratum+tcp://msk2-ru.enter.rupool.pro:8889
stratum+tcp://msk2-ru.enter.rupool.pro:444
stratum+tcp://msk2-ru.enter.rupool.pro:26
stratum+ssl://msk2-ru.enter.rupool.pro:998

Novosibirsk

stratum+tcp://nsk-ru.enter.rupool.pro:3334
Other ports (if the main one is blocked by your ISP)
stratum+tcp://nsk-ru.enter.rupool.pro:8889
stratum+tcp://nsk-ru.enter.rupool.pro:444
stratum+tcp://nsk-ru.enter.rupool.pro:26
stratum+ssl://nsk-ru.enter.rupool.pro:998

Helsinki

stratum+tcp://hel-fi.enter.rupool.pro:3334
Other ports (if the main one is blocked by your ISP)
stratum+tcp://hel-fi.enter.rupool.pro:8889
stratum+tcp://hel-fi.enter.rupool.pro:444
stratum+tcp://hel-fi.enter.rupool.pro:26
stratum+ssl://hel-fi.enter.rupool.pro:998

Almaty

stratum+tcp://ala-kz.enter.rupool.pro:3334
Other ports (if the main one is blocked by your ISP)
stratum+tcp://ala-kz.enter.rupool.pro:8889
stratum+tcp://ala-kz.enter.rupool.pro:444
stratum+tcp://ala-kz.enter.rupool.pro:26
stratum+ssl://ala-kz.enter.rupool.pro:998
Login (worker):own.1

Format: <subaccount>.<worker>. Get your subaccount in the cabinet.

Password:anything

Connect to the LTC stratum — DOGE is credited automatically (merged mining). No separate DOGE address or wallet is needed to connect.

How to set up Elphapex DG1 on the pool

  1. Find the miner IP

    Find the miner IP address in the router's client list and open it in a browser.

  2. Log in to the web interface

    Sign in to the miner's control panel.

  3. Open the pool settings section

    Find the Pool / Miner Configuration section with fields for pool addresses.

  4. Fill in the pool addresses

    Pool 1 — the recommended address (auto-select), Pool 2 and Pool 3 — two nearest locations. Worker — a login in the form subaccount.worker, Password — anything.

  5. Save and check

    Save the settings, wait for the restart and check share submission; accruals appear in the cabinet.

Elphapex entered the Scrypt market in 2024 with the DG1 at 11 GH/s and soon followed with the DG1+ at 14 GH/s. In 2025 it added the DG Home 1: about 2.1 GH/s at roughly 630 W, built to sit in a living room rather than a garage.

The DG1 and DG1+ are full-size miners for garages, farms and hosting, competing with the Antminer L7 and L9. The DG Home 1 targets home miners who want Litecoin and Dogecoin exposure without a dedicated circuit or a noise problem.

On RuPool every model in the line points at the LTC stratum, and Dogecoin is merge-mined and credited automatically at its own FPPS rate. Payouts accrue per share, so even a single DG Home earns daily in proportion to its hashrate.

The DG Home 1 accepts 110–240 V, so it runs on a standard 120 V North American outlet as well as on 230 V in Europe. At about 630 W it uses roughly 15 kWh per day. Reviews put noise under 45 dB, other listings around 50 dB — closer to a quiet office than a vacuum cleaner. It has Wi-Fi as well as Ethernet, plus low-power and overclock modes.

The DG1 and DG1+ are a different class: about 75 dB, four fans and 3.4–3.9 kW. They need a dedicated 200–240 V circuit; the DG1+ reportedly uses C20 power inlets, so pick cords rated for the current. At 3.92 kW the DG1+ consumes about 94 kWh per day.

On efficiency, the DG1+ (about 280 J/GH) beats the Antminer L7 (~360 J/GH) but trails the L9 (~210) and L11 (~184). The original DG1 sits near 310 J/GH, and the DG Home 1 lands in the same range at about 300 J/GH; what you pay for there is silence and plug-in convenience, not record efficiency.

All models run stock Elphapex firmware with a web UI; get updates from the manufacturer's official site. Third-party firmware is your call, with warranty in mind.

Frequently asked questions

How much does the DG Home 1 make per month in USD?

It depends on Scrypt difficulty and LTC and DOGE prices. The live FPPS estimate for each variant at the top of this page updates automatically; subtract about 15 kWh per day times your electricity rate.

Can I run the DG Home 1 on a 120 V outlet?

Yes. Its input range is 110–240 V and it draws about 630 W, which a standard outlet handles. Avoid sharing the circuit with heaters or other heavy appliances.

DG1 vs DG1+ vs DG Home 1: which one should I get?

DG1+ for the most hashrate per unit in a garage or hosting, DG1 if you find it cheaper, DG Home 1 if the miner has to live indoors on household power.

What are the RuPool stratum settings for Elphapex miners?

Use the LTC stratum URL for your region shown above, or the auto address with failover. Worker name is subaccount.worker; the password can be anything. Dogecoin needs no extra configuration.

How loud is the Elphapex DG1+?

About 75 dB, similar to other full-size air-cooled ASICs. It is not suitable for living spaces without a sound-dampening enclosure.

Do I get Dogecoin with an Elphapex on RuPool?

Yes. DOGE is merge-mined alongside LTC and credited automatically at its own rate; you do not add a second pool or a DOGE address on the miner.

Connect Elphapex DG1 to RuPool

Sign up — your cabinet opens a step-by-step guide: create a subaccount, set a payout address and enter the stratum address in the miner.

Daily payouts, 1% FPPS fee, 24/7 support.

Start mining