BTC mining on the RuPool pool · 335 TH/s, 5,360 W
≈ $9.62/day · covers power up to $0.075/kWh
After sign-up your cabinet opens a step-by-step connection guide.
| Mode | Hashrate | Power | Efficiency |
|---|---|---|---|
| Antminer S21 Hydro 335 TH/sprimary | 335 TH/s | 5,360 W | 16 J/TH |
| Antminer S21 XP Hydro 473 TH/s | 473 TH/s | 5,676 W | 12 J/TH |
| Mode | Mined per day | Revenue per day | Revenue per month | Power use | Covers power |
|---|---|---|---|---|---|
| Antminer S21 Hydro 335 TH/s | 0.00015389 BTC | $9.62 | $288.74 | 128.6 kWh | up to $0.075/kWh |
| Antminer S21 XP Hydro 473 TH/s | 0.00021729 BTC | $13.59 | $407.68 | 136.2 kWh | up to $0.1/kWh |
| Tariff | Profit per day | Profit per month |
|---|---|---|
| $0.05/kWh | $3.19 | $95.78 |
| $0.08/kWh | -$0.67 | -$20.00 |
| $0.12/kWh | -$5.81 | -$174.37 |
Calculated on 18 November 2026. Pool fee included. Rate: 1 BTC = $62,539.90.
Precise estimate in the profitability calculatorPool address, login and password to connect Antminer S21 Hydro.
Recommended address — automatic location pick with failover
stratum+tcp://enter.rupool.pro:3333stratum+tcp://enter.rupool.pro:8888stratum+tcp://enter.rupool.pro:443stratum+tcp://enter.rupool.pro:25stratum+ssl://enter.rupool.pro:999Moscow (whitelist)
stratum+tcp://msk-ru.enter.rupool.pro:3333stratum+tcp://msk-ru.enter.rupool.pro:8888stratum+tcp://msk-ru.enter.rupool.pro:443stratum+tcp://msk-ru.enter.rupool.pro:25stratum+ssl://msk-ru.enter.rupool.pro:999Moscow
stratum+tcp://msk2-ru.enter.rupool.pro:3333stratum+tcp://msk2-ru.enter.rupool.pro:8888stratum+tcp://msk2-ru.enter.rupool.pro:443stratum+tcp://msk2-ru.enter.rupool.pro:25stratum+ssl://msk2-ru.enter.rupool.pro:999Novosibirsk
stratum+tcp://nsk-ru.enter.rupool.pro:3333stratum+tcp://nsk-ru.enter.rupool.pro:8888stratum+tcp://nsk-ru.enter.rupool.pro:443stratum+tcp://nsk-ru.enter.rupool.pro:25stratum+ssl://nsk-ru.enter.rupool.pro:999Helsinki
stratum+tcp://hel-fi.enter.rupool.pro:3333stratum+tcp://hel-fi.enter.rupool.pro:8888stratum+tcp://hel-fi.enter.rupool.pro:443stratum+tcp://hel-fi.enter.rupool.pro:25stratum+ssl://hel-fi.enter.rupool.pro:999Almaty
stratum+tcp://ala-kz.enter.rupool.pro:3333stratum+tcp://ala-kz.enter.rupool.pro:8888stratum+tcp://ala-kz.enter.rupool.pro:443stratum+tcp://ala-kz.enter.rupool.pro:25stratum+ssl://ala-kz.enter.rupool.pro:999own.025Format: <subaccount>.<worker>. Get your subaccount in the cabinet.
Find the miner IP
Find the ASIC IP address in your router's DHCP client list, or press the IP Report button on the miner itself.
Open the web interface
Enter the IP address in a browser on a computer on the same network.
Log in to the panel
Default login and password on stock firmware are root / root.
Open the pool settings
Go to Miner Configuration → General Settings, the Pool 1, Pool 2, Pool 3 block.
Fill in the pool addresses
Pool 1 — the recommended address (auto-select), Pool 2 and Pool 3 — two nearest locations. Worker — your login in the form subaccount.worker, Password — anything.
Save and check
Press Save & Apply, wait for the restart and check share submission on the Miner Status tab; accruals appear in the cabinet.
The S21 Hyd is the liquid-cooled member of Bitmain's S21 generation: 335 TH/s at 5,360 W, about 16 J/TH. Hashboards sit on cold plates connected to an external coolant loop, so most of the heat leaves the unit as warm liquid rather than hot air.
It is built for containerised farms, hydro racks and setups that reuse heat for space or water heating. It will not run from a household outlet: it needs a 380–415 V three-phase supply and a working loop with a pump, a heat exchanger and a dry cooler or other heat sink.
On RuPool it mines Bitcoin on SHA-256 under FPPS. The variant table also covers the newer S21 XP Hyd (473 TH/s, about 12 J/TH), with revenue in USD calculated the same way.
Loop requirements. Bitmain specifies 8–10 L/min of coolant flow per unit and a maximum pressure of 3.5 bar. Supported coolants are antifreeze, pure water or deionised water within the pH limits in the manual. Outdoor dry coolers in cold climates need glycol, and a plate heat exchanger between the outdoor circuit and the miner circuit keeps debris away from the cold plates.
Electrical. Input is 380–415 V AC, so plan three-phase distribution with one breaker per miner. When you size the supply and work out cost per kWh, budget the pumps and dry-cooler fans on top of 5.36 kW (S21 Hyd) or 5.68 kW (S21 XP Hyd) per unit.
Noise and footprint. The miner itself is quiet; the dry-cooler fans make the noise, and they can live outdoors. That makes a hydro S21 workable in a basement or utility room where a 76 dB air-cooled S21 would not be. Net weight is 12.3 kg.
Where it fits. The S21 Hyd (16 J/TH) beats the original air S21 (17.5) but trails the S21 Pro (15) and S21 XP (13.5) on efficiency. It earns its place through density and heat recovery. The S21 XP Hyd takes the same concept down to about 12 J/TH. Both run stock Bitmain firmware with pool settings in the web interface.
5.36 kW × 24 h is about 128.6 kWh per day before pumps and dry-cooler fans. Multiply by your rate and compare with the live USD revenue estimate at the top of this page.
Yes. The input range is 380–415 V AC, which means industrial three-phase distribution. It cannot be fed from a 120 V or 240 V residential circuit.
Yes, and that is the main reason to choose hydro. Nearly all the heat ends up in the coolant, which can feed underfloor heating, a buffer tank or a greenhouse via a heat exchanger, with a dry cooler dumping the surplus in summer.
The XP Hyd delivers 473 TH/s for 5,676 W, about 12 J/TH versus 16 J/TH. On expensive power it is the clear choice; on cheap power a discounted S21 Hyd can still make sense. The live estimate covers both variants.
Start the loop and confirm flow before powering the miner. Then open the Bitmain web interface, paste a stratum URL from this page, set the worker to subaccount.worker with any password, and add a second region or the failover auto-address as backup.
Chip temperatures climb quickly and the miner throttles or shuts down to protect itself. Monitor flow and inlet temperature on the loop side, and watch for the worker going offline in your RuPool dashboard.
Sign up — your cabinet opens a step-by-step guide: create a subaccount, set a payout address and enter the stratum address in the miner.
Daily payouts, 1% FPPS fee, 24/7 support.