Antminer S23

BTC mining on the RuPool pool · 318 TH/s, 3,498 W

≈ $9.14/day · covers power up to $0.109/kWh

Start mining

After sign-up your cabinet opens a step-by-step connection guide.

Specifications

ModeHashratePowerEfficiency
Antminer S23 318 TH/sprimary318 TH/s3,498 W11 J/TH
Manufacturer
Bitmain
Algorithm
SHA-256
Cooling
Air
Release year
2026
Voltage
220–277

Specification source

Profitability

ModeMined per dayRevenue per dayRevenue per monthPower useCovers power
Antminer S23 318 TH/s0.00014608 BTC$9.14$274.0884 kWhup to $0.109/kWh

Net profit, mode “Antminer S23 318 TH/s”

TariffProfit per dayProfit per month
$0.05/kWh$4.94$148.16
$0.08/kWh$2.42$72.60
$0.12/kWh-$0.94-$28.14

Calculated on 18 November 2026. Pool fee included. Rate: 1 BTC = $62,539.90.

Precise estimate in the profitability calculator

RuPool setup

Pool address, login and password to connect Antminer S23.

Recommended address — automatic location pick with failover

stratum+tcp://enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://enter.rupool.pro:8888
stratum+tcp://enter.rupool.pro:443
stratum+tcp://enter.rupool.pro:25
stratum+ssl://enter.rupool.pro:999
Addresses by location

Moscow (whitelist)

stratum+tcp://msk-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://msk-ru.enter.rupool.pro:8888
stratum+tcp://msk-ru.enter.rupool.pro:443
stratum+tcp://msk-ru.enter.rupool.pro:25
stratum+ssl://msk-ru.enter.rupool.pro:999

Moscow

stratum+tcp://msk2-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://msk2-ru.enter.rupool.pro:8888
stratum+tcp://msk2-ru.enter.rupool.pro:443
stratum+tcp://msk2-ru.enter.rupool.pro:25
stratum+ssl://msk2-ru.enter.rupool.pro:999

Novosibirsk

stratum+tcp://nsk-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://nsk-ru.enter.rupool.pro:8888
stratum+tcp://nsk-ru.enter.rupool.pro:443
stratum+tcp://nsk-ru.enter.rupool.pro:25
stratum+ssl://nsk-ru.enter.rupool.pro:999

Helsinki

stratum+tcp://hel-fi.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://hel-fi.enter.rupool.pro:8888
stratum+tcp://hel-fi.enter.rupool.pro:443
stratum+tcp://hel-fi.enter.rupool.pro:25
stratum+ssl://hel-fi.enter.rupool.pro:999

Almaty

stratum+tcp://ala-kz.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://ala-kz.enter.rupool.pro:8888
stratum+tcp://ala-kz.enter.rupool.pro:443
stratum+tcp://ala-kz.enter.rupool.pro:25
stratum+ssl://ala-kz.enter.rupool.pro:999
Login (worker):own.02

Format: <subaccount>.<worker>. Get your subaccount in the cabinet.

Password:anything

How to set up Antminer S23 on the pool

  1. Find the miner IP

    Find the ASIC IP address in your router's DHCP client list, or press the IP Report button on the miner itself.

  2. Open the web interface

    Enter the IP address in a browser on a computer on the same network.

  3. Log in to the panel

    Default login and password on stock firmware are root / root.

  4. Open the pool settings

    Go to Miner Configuration → General Settings, the Pool 1, Pool 2, Pool 3 block.

  5. Fill in the pool addresses

    Pool 1 — the recommended address (auto-select), Pool 2 and Pool 3 — two nearest locations. Worker — your login in the form subaccount.worker, Password — anything.

  6. Save and check

    Press Save & Apply, wait for the restart and check share submission on the Miner Status tab; accruals appear in the cabinet.

The S23 is the generation that follows the S21. The air-cooled model is rated at 318 TH/s for 3,498 W, roughly 11 J/TH, and started shipping in early 2026. Its power draw sits right where the original S21 was, while hashrate is close to 60% higher.

For a buyer the number that matters is joules per terahash. At 11 J/TH the S23 tolerates a higher electricity price than any S21 model before revenue stops covering power, which makes it the safest air-cooled choice ahead of future difficulty increases.

On RuPool the S23 mines Bitcoin under FPPS with a 1% pool fee. Third-party calculators lag behind new models, so the live USD estimate at the top of this page, based on our current FPPS rate, is a practical way to size the purchase.

Thermals and noise. Air-cooled with high-RPM fans; retailer spec sheets put noise around 75 dB, in line with the S21 family. Treat it like a 3.5 kW heater with a loud fan: a separate room, filtered intake and ducted exhaust.

Power. Retail listings give single-phase input in the same range as the air-cooled S21 models; check the nameplate on your unit before wiring. Daily consumption is about 84 kWh, so circuits built for an S21 can usually take an S23 swap without rewiring.

S23 vs S21 XP. 318 TH/s versus 270 TH/s, and about 150 W less at the wall. Against the S21 Pro and the plain S21 the gap is wider still. The trade-off is upfront cost and little second-hand supply.

Other S23 versions. Bitmain also builds the S23 Hyd (580 TH/s, 9.5 J/TH) and the rack-mounted S23 Hyd 3U (1,160 TH/s), both designed for three-phase power and liquid loops in data centers. All of them speak standard stratum and work with RuPool on stock firmware.

Frequently asked questions

What does an Antminer S23 earn per day in USD?

It depends on network difficulty and the BTC price. The live FPPS estimate at the top of this page shows current revenue in USD and refreshes automatically; subtract about 84 kWh times your power rate.

Is the S23 worth it over a used S21 XP?

The S23 does more work per kWh (about 11 vs 13.5 J/TH), so it wins on expensive power. On very cheap power, a discounted S21 XP can still be competitive. Compare both pages against your own tariff.

What electricity price can the S23 handle?

Its break-even price per kWh is the daily USD revenue shown above divided by about 84 kWh. Because difficulty and BTC price change, recheck it regularly rather than relying on a one-off number.

How do I point an S23 at RuPool?

Open the Bitmain web interface by the miner's IP, go to the pool settings, paste a stratum URL from this page, use subaccount.worker as the worker and any password, and fill the backup slots with another region or the failover auto-address.

Does the S23 come in a hydro version?

Yes: the S23 Hyd at 580 TH/s and the 3U rack-mount S23 Hyd at 1,160 TH/s. Both need three-phase power and a liquid loop; this page covers the air-cooled model.

How loud is the S23?

Retailers list around 75 dB, similar to other air-cooled Antminers. Plan for a garage, outbuilding or ventilated sound box rather than a living space.

Connect Antminer S23 to RuPool

Sign up — your cabinet opens a step-by-step guide: create a subaccount, set a payout address and enter the stratum address in the miner.

Daily payouts, 1% FPPS fee, 24/7 support.

Start mining