Whatsminer M63S

BTC mining on the RuPool pool · 390 TH/s, 7,215 W

≈ $11.20/day · covers power up to $0.065/kWh

Start mining

After sign-up your cabinet opens a step-by-step connection guide.

Specifications

ModeHashratePowerEfficiency
Whatsminer M63S 390 TH/sprimary390 TH/s7,215 W18.5 J/TH
Whatsminer M63S+ 424 TH/s424 TH/s7,208 W17 J/TH
Manufacturer
MicroBT
Algorithm
SHA-256
Cooling
Hydro
Release year
2023
Voltage
380–480
Dimensions
483 × 663 × 86 mm
Weight
27.5 kg

Specification source

Profitability

ModeMined per dayRevenue per dayRevenue per monthPower useCovers power
Whatsminer M63S 390 TH/s0.00017916 BTC$11.20$336.14173.2 kWhup to $0.065/kWh
Whatsminer M63S+ 424 TH/s0.00019478 BTC$12.18$365.44173 kWhup to $0.07/kWh

Net profit, mode “Whatsminer M63S 390 TH/s”

TariffProfit per dayProfit per month
$0.05/kWh$2.55$76.40
$0.08/kWh-$2.65-$79.44
$0.12/kWh-$9.57-$287.24

Calculated on 18 November 2026. Pool fee included. Rate: 1 BTC = $62,539.90.

Precise estimate in the profitability calculator

RuPool setup

Pool address, login and password to connect Whatsminer M63S.

Recommended address — automatic location pick with failover

stratum+tcp://enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://enter.rupool.pro:8888
stratum+tcp://enter.rupool.pro:443
stratum+tcp://enter.rupool.pro:25
stratum+ssl://enter.rupool.pro:999
Addresses by location

Moscow (whitelist)

stratum+tcp://msk-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://msk-ru.enter.rupool.pro:8888
stratum+tcp://msk-ru.enter.rupool.pro:443
stratum+tcp://msk-ru.enter.rupool.pro:25
stratum+ssl://msk-ru.enter.rupool.pro:999

Moscow

stratum+tcp://msk2-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://msk2-ru.enter.rupool.pro:8888
stratum+tcp://msk2-ru.enter.rupool.pro:443
stratum+tcp://msk2-ru.enter.rupool.pro:25
stratum+ssl://msk2-ru.enter.rupool.pro:999

Novosibirsk

stratum+tcp://nsk-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://nsk-ru.enter.rupool.pro:8888
stratum+tcp://nsk-ru.enter.rupool.pro:443
stratum+tcp://nsk-ru.enter.rupool.pro:25
stratum+ssl://nsk-ru.enter.rupool.pro:999

Helsinki

stratum+tcp://hel-fi.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://hel-fi.enter.rupool.pro:8888
stratum+tcp://hel-fi.enter.rupool.pro:443
stratum+tcp://hel-fi.enter.rupool.pro:25
stratum+ssl://hel-fi.enter.rupool.pro:999

Almaty

stratum+tcp://ala-kz.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://ala-kz.enter.rupool.pro:8888
stratum+tcp://ala-kz.enter.rupool.pro:443
stratum+tcp://ala-kz.enter.rupool.pro:25
stratum+ssl://ala-kz.enter.rupool.pro:999
Login (worker):own.cugankop2

Format: <subaccount>.<worker>. Get your subaccount in the cabinet.

Password:anything

How to set up Whatsminer M63S on the pool

  1. Find the miner IP

    Find the Whatsminer IP in the router's client list or via the WhatsMinerTool utility.

  2. Open the web interface

    Enter the IP address in a browser; default login and password are admin / admin.

  3. Open the pool settings

    Go to Configuration → Pools (CGMiner configuration).

  4. Fill in the pool addresses

    Pool 1 — the recommended address (auto-select), Pool 2 and Pool 3 — two nearest locations. Worker — a login in the form subaccount.worker, Password — anything.

  5. Save and restart

    Press Save/Apply and wait for the miner to restart; check the status in the panel and accruals in the cabinet.

The Whatsminer M63S is MicroBT's liquid-cooled SHA-256 miner from the M60 generation, shipping since late 2023. It is a 2U rack module rather than a fan-cooled box: cold plates inside carry heat into a water loop, so it belongs in hydro containers and facilities with dry coolers, not in a spare room.

On RuPool it mines Bitcoin under FPPS. Every accepted share is paid at the current rate, so your BTC income tracks hashrate and network difficulty rather than pool luck. The live USD estimate at the top of this page updates from that rate; subtract your own power cost per kWh to see the real margin.

Typical buyers are operators who want more terahash per rack and a way to reuse heat — greenhouses, district heating, industrial drying. At roughly 7.2 kW per unit, the economics come down to your electricity price and how cheaply you can reject or sell the heat.

There are no fans on the unit, so the rack itself is close to silent; the noise moves to the pumps and the dry cooler. What you need is a closed loop with a pump, filtration, a dry cooler or plate heat exchanger, coolant that meets MicroBT's spec (deionized water, or a glycol mix for outdoor loops) and monitoring of flow and inlet temperature. Take flow rate and inlet limits from MicroBT's hydro cooling guide rather than from reseller listings, which disagree with each other.

Power input is three-phase 380–480 V. At about 7.2 kW per miner, even ten units call for a dedicated feed, proper PDUs and breakers sized by an electrician for continuous load. Residential single-phase 120 V or 240 V circuits are not an option.

MicroBT splits the M60 family by cooling: M60 and M60S are air-cooled, M63 and M63S are hydro, M66 and M66S are for immersion. The M63S+ is the more efficient hydro step, around 17 J/TH versus 18.5 J/TH for the M63S. Both trims are listed in the spec table.

Stock Whatsminer firmware covers pool configuration and power modes through the web UI. Third-party firmware exists for the M60 series; weigh warranty terms before switching. On a hydro unit any tuning headroom is set by the loop's heat rejection, not by fan speed.

Frequently asked questions

How much does the Whatsminer M63S make per day in USD?

It depends on network difficulty and the BTC price. The live FPPS estimate at the top of this page is recalculated automatically. To get net profit, subtract roughly 7.2 kW times 24 hours times your price per kWh, plus loop maintenance.

What stratum URL do I use for the M63S on RuPool?

The page above lists stratum addresses for Moscow, Moscow-2, Novosibirsk, Helsinki and Almaty, plus an auto address with failover. Use subaccount.worker as the worker name; the password can be anything.

Do I need a dry cooler for the M63S?

Yes, or another way to dump about 7.2 kW of heat per unit: a plate heat exchanger into a building loop, a cooling tower or a heat-recovery system. The miner will not run without coolant flow.

What power supply does the M63S need?

Three-phase 380–480 V AC. It will not run on a household single-phase outlet. Plan breakers and cabling with an electrician for a continuous 7.2 kW load per unit.

M63S or M63S+: which should I buy?

The M63S+ delivers more terahash for about the same power, so it wins on efficiency; the M63S is usually cheaper. Compare both against your electricity price using the live numbers on this page.

Can I keep stock firmware on the M63S?

Yes. Stock Whatsminer firmware is all you need to mine on RuPool. Update it only from MicroBT's official site.

Connect Whatsminer M63S to RuPool

Sign up — your cabinet opens a step-by-step guide: create a subaccount, set a payout address and enter the stratum address in the miner.

Daily payouts, 1% FPPS fee, 24/7 support.

Start mining