Whatsminer M30S

BTC mining on the RuPool pool · 112 TH/s, 3,472 W

≈ $3.25/day · covers power up to $0.039/kWh

Start mining

After sign-up your cabinet opens a step-by-step connection guide.

Specifications

ModeHashratePowerEfficiency
Whatsminer M30S++ 112 TH/sprimary112 TH/s3,472 W31 J/TH
Whatsminer M30S++ 108 TH/s108 TH/s3,348 W31 J/TH
Whatsminer M30S+ 100 TH/s100 TH/s3,400 W34 J/TH
Whatsminer M30S 88 TH/s88 TH/s3,344 W38 J/TH
Manufacturer
MicroBT
Algorithm
SHA-256
Cooling
Air
Release year
2020
Noise level
75 dB
Voltage
220–240

Specification source

Profitability

ModeMined per dayRevenue per dayRevenue per monthPower useCovers power
Whatsminer M30S++ 112 TH/s0.00005138 BTC$3.25$97.4683.3 kWhup to $0.039/kWh
Whatsminer M30S++ 108 TH/s0.00004955 BTC$3.13$93.9880.4 kWhup to $0.039/kWh
Whatsminer M30S+ 100 TH/s0.00004588 BTC$2.90$87.0281.6 kWhup to $0.036/kWh
Whatsminer M30S 88 TH/s0.00004037 BTC$2.55$76.5780.3 kWhup to $0.032/kWh

Net profit, mode “Whatsminer M30S++ 112 TH/s”

TariffProfit per dayProfit per month
$0.05/kWh-$0.92-$27.53
$0.08/kWh-$3.42-$102.53
$0.12/kWh-$6.75-$202.52

Calculated on 19 November 2026. Pool fee included. Rate: 1 BTC = $63,221.60.

Precise estimate in the profitability calculator

RuPool setup

Pool address, login and password to connect Whatsminer M30S.

Recommended address — automatic location pick with failover

stratum+tcp://enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://enter.rupool.pro:8888
stratum+tcp://enter.rupool.pro:443
stratum+tcp://enter.rupool.pro:25
stratum+ssl://enter.rupool.pro:999
Addresses by location

Moscow (whitelist)

stratum+tcp://msk-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://msk-ru.enter.rupool.pro:8888
stratum+tcp://msk-ru.enter.rupool.pro:443
stratum+tcp://msk-ru.enter.rupool.pro:25
stratum+ssl://msk-ru.enter.rupool.pro:999

Moscow

stratum+tcp://msk2-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://msk2-ru.enter.rupool.pro:8888
stratum+tcp://msk2-ru.enter.rupool.pro:443
stratum+tcp://msk2-ru.enter.rupool.pro:25
stratum+ssl://msk2-ru.enter.rupool.pro:999

Novosibirsk

stratum+tcp://nsk-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://nsk-ru.enter.rupool.pro:8888
stratum+tcp://nsk-ru.enter.rupool.pro:443
stratum+tcp://nsk-ru.enter.rupool.pro:25
stratum+ssl://nsk-ru.enter.rupool.pro:999

Helsinki

stratum+tcp://hel-fi.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://hel-fi.enter.rupool.pro:8888
stratum+tcp://hel-fi.enter.rupool.pro:443
stratum+tcp://hel-fi.enter.rupool.pro:25
stratum+ssl://hel-fi.enter.rupool.pro:999

Almaty

stratum+tcp://ala-kz.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://ala-kz.enter.rupool.pro:8888
stratum+tcp://ala-kz.enter.rupool.pro:443
stratum+tcp://ala-kz.enter.rupool.pro:25
stratum+ssl://ala-kz.enter.rupool.pro:999
Login (worker):own.003

Format: <subaccount>.<worker>. Get your subaccount in the cabinet.

Password:anything

How to set up Whatsminer M30S on the pool

  1. Find the miner IP

    Find the Whatsminer IP in the router's client list or via the WhatsMinerTool utility.

  2. Open the web interface

    Enter the IP address in a browser; default login and password are admin / admin.

  3. Open the pool settings

    Go to Configuration → Pools (CGMiner configuration).

  4. Fill in the pool addresses

    Pool 1 — the recommended address (auto-select), Pool 2 and Pool 3 — two nearest locations. Worker — a login in the form subaccount.worker, Password — anything.

  5. Save and restart

    Press Save/Apply and wait for the miner to restart; check the status in the panel and accruals in the cabinet.

The Whatsminer M30S family launched in 2020 and became one of the most widely deployed Bitcoin miners of its era. Three versions are common: the M30S at about 38 J/TH, the M30S+ at about 34 J/TH and the M30S++ at about 31 J/TH.

That is roughly twice the energy per terahash of today's machines, so the question is not whether an M30S can hash but whether your power price lets it pay its own bill. Many owners now run them where the heat has a use: a workshop, a greenhouse, a garage in winter.

On RuPool every M30S variant mines Bitcoin (SHA-256) under FPPS, earning the pool rate for each accepted share.

The M30S runs on 220–240 V single-phase through an integrated power supply and a C19 cord rated 16 A or more, drawing roughly 3.3 to 3.5 kW. In North America plan a dedicated 240 V circuit; a standard 120 V outlet will not do.

Two fans produce about 75 dB. If you build a sound enclosure, give it at least as much airflow as the miner's own fans, or it will throttle and lose hashrate. Ducting exhaust air outdoors or into a space you want to heat is the cleanest setup.

When buying used, test before you pay: these units are several years old and many have had hashboards replaced. Look at actual hashrate and active errors in the web interface rather than the label.

Configuration and diagnostics are done in the web interface or with MicroBT's WhatsMinerTool. Stock firmware is the default; RuPool accepts any firmware that uses standard stratum.

Frequently asked questions

Is the Whatsminer M30S still worth running?

Only with cheap electricity or useful heat. At around 80 kWh per day per unit, the power bill decides. Compare your daily energy cost with the live FPPS revenue on this page.

M30S vs M30S+ vs M30S++: what is the difference?

Chip binning. The M30S is rated around 38 J/TH, the M30S+ around 34 J/TH and the M30S++ around 31 J/TH. Same chassis and power connection; the ++ gives the most hashrate per kilowatt.

How much does an M30S++ earn per day in USD?

It depends on network difficulty and the Bitcoin price. The live FPPS estimate at the top of this page updates automatically for the variant you select.

How do I point an M30S to RuPool?

Find the miner's IP with WhatsMinerTool or your router, open it in a browser, enter a RuPool stratum URL from this page, set the worker as subaccount.worker and any password, then save. WhatsMinerTool can apply the same settings to many miners at once.

How loud is the M30S and can I quiet it?

About 75 dB. A sound box works if it does not restrict airflow; undersized vents cause overheating and hashrate loss. Ducting the exhaust away also cuts noise in the room.

What do Whatsminer error codes on the M30S mean?

The code shown in the web interface or WhatsMinerTool points to a subsystem: power, fans, temperature, hashboards or network. MicroBT's documentation lists the exact meaning of each code.

Connect Whatsminer M30S to RuPool

Sign up — your cabinet opens a step-by-step guide: create a subaccount, set a payout address and enter the stratum address in the miner.

Daily payouts, 1% FPPS fee, 24/7 support.

Start mining