Whatsminer M50S

BTC mining on the RuPool pool · 120 TH/s, 3,360 W

≈ $3.46/day · covers power up to $0.043/kWh

Start mining

After sign-up your cabinet opens a step-by-step connection guide.

Specifications

ModeHashratePowerEfficiency
Whatsminer M50 120 TH/sprimary120 TH/s3,360 W28 J/TH
Whatsminer M50 118 TH/s118 TH/s3,304 W28 J/TH
Whatsminer M50 122 TH/s122 TH/s3,416 W28 J/TH
Whatsminer M50S 126 TH/s126 TH/s3,276 W26 J/TH
Whatsminer M50S 130 TH/s130 TH/s3,380 W26 J/TH
Manufacturer
MicroBT
Algorithm
SHA-256
Cooling
Air
Release year
2022
Noise level
75 dB
Voltage
220–240
Dimensions
430 × 155 × 226 mm
Weight
13.5 kg

Specification source

Profitability

ModeMined per dayRevenue per dayRevenue per monthPower useCovers power
Whatsminer M50 120 TH/s0.00005508 BTC$3.46$103.9280.6 kWhup to $0.043/kWh
Whatsminer M50 118 TH/s0.00005416 BTC$3.41$102.1879.3 kWhup to $0.043/kWh
Whatsminer M50 122 TH/s0.000056 BTC$3.52$105.6582 kWhup to $0.043/kWh
Whatsminer M50S 126 TH/s0.00005783 BTC$3.64$109.1178.6 kWhup to $0.046/kWh
Whatsminer M50S 130 TH/s0.00005967 BTC$3.75$112.5881.1 kWhup to $0.046/kWh

Net profit, mode “Whatsminer M50 120 TH/s”

TariffProfit per dayProfit per month
$0.05/kWh-$0.57-$17.04
$0.08/kWh-$2.99-$89.62
$0.12/kWh-$6.21-$186.39

Calculated on 19 November 2026. Pool fee included. Rate: 1 BTC = $62,887.60.

Precise estimate in the profitability calculator

RuPool setup

Pool address, login and password to connect Whatsminer M50S.

Recommended address — automatic location pick with failover

stratum+tcp://enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://enter.rupool.pro:8888
stratum+tcp://enter.rupool.pro:443
stratum+tcp://enter.rupool.pro:25
stratum+ssl://enter.rupool.pro:999
Addresses by location

Moscow (whitelist)

stratum+tcp://msk-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://msk-ru.enter.rupool.pro:8888
stratum+tcp://msk-ru.enter.rupool.pro:443
stratum+tcp://msk-ru.enter.rupool.pro:25
stratum+ssl://msk-ru.enter.rupool.pro:999

Moscow

stratum+tcp://msk2-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://msk2-ru.enter.rupool.pro:8888
stratum+tcp://msk2-ru.enter.rupool.pro:443
stratum+tcp://msk2-ru.enter.rupool.pro:25
stratum+ssl://msk2-ru.enter.rupool.pro:999

Novosibirsk

stratum+tcp://nsk-ru.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://nsk-ru.enter.rupool.pro:8888
stratum+tcp://nsk-ru.enter.rupool.pro:443
stratum+tcp://nsk-ru.enter.rupool.pro:25
stratum+ssl://nsk-ru.enter.rupool.pro:999

Helsinki

stratum+tcp://hel-fi.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://hel-fi.enter.rupool.pro:8888
stratum+tcp://hel-fi.enter.rupool.pro:443
stratum+tcp://hel-fi.enter.rupool.pro:25
stratum+ssl://hel-fi.enter.rupool.pro:999

Almaty

stratum+tcp://ala-kz.enter.rupool.pro:3333
Other ports (if the main one is blocked by your ISP)
stratum+tcp://ala-kz.enter.rupool.pro:8888
stratum+tcp://ala-kz.enter.rupool.pro:443
stratum+tcp://ala-kz.enter.rupool.pro:25
stratum+ssl://ala-kz.enter.rupool.pro:999
Login (worker):own.121x119

Format: <subaccount>.<worker>. Get your subaccount in the cabinet.

Password:anything

How to set up Whatsminer M50S on the pool

  1. Find the miner IP

    Find the Whatsminer IP in the router's client list or via the WhatsMinerTool utility.

  2. Open the web interface

    Enter the IP address in a browser; default login and password are admin / admin.

  3. Open the pool settings

    Go to Configuration → Pools (CGMiner configuration).

  4. Fill in the pool addresses

    Pool 1 — the recommended address (auto-select), Pool 2 and Pool 3 — two nearest locations. Worker — a login in the form subaccount.worker, Password — anything.

  5. Save and restart

    Press Save/Apply and wait for the miner to restart; check the status in the panel and accruals in the cabinet.

MicroBT's M50 series arrived in 2022 as the successor to the M30 line. Two versions dominate the market: the M50 at about 28 J/TH and the M50S at about 26 J/TH. They share the same chassis, fans and integrated power supply; the S simply uses more efficient chips.

For home-scale and small hosting setups the appeal is simple: one 220–240 V single-phase cord per miner, no external PSU or PDU. Pick your exact unit in the table and the live revenue estimate follows its hashrate.

On RuPool the M50 and M50S mine Bitcoin (SHA-256) and are paid FPPS for every accepted share, so payouts follow your hashrate, not block luck.

Power comes through a built-in P221B/P222B supply rated for 220–240 V, connected with a single C19 cord rated 16 A or higher. Expect roughly 3.3 to 3.4 kW at the wall depending on the bin. In North America that means a dedicated 240 V circuit sized for continuous load.

MicroBT rates the M50 family for −5 to 35 °C ambient, a tighter upper limit than many competing miners. Two high-flow fans run at about 75 dB. MicroBT does not support adding extra fans to series-50 machines, so solve heat with room ventilation instead.

If you are choosing between an M50 and an M50S at a similar price, the M50S wins: two joules per terahash adds up over a year of electricity bills. The later M50S+ and M50S++ are more efficient still.

Everything can be managed from the browser-based web interface or from MicroBT's WhatsMinerTool, which scans your network, changes pools in bulk, updates firmware and shows error codes. Stock MicroBT firmware is the default; RuPool accepts any firmware using standard stratum.

Frequently asked questions

What is the difference between the Whatsminer M50 and M50S?

Efficiency. The M50 is rated around 28 J/TH and the M50S around 26 J/TH, in the same chassis with the same power supply. At equal hashrate the M50S uses less electricity.

How much does the Whatsminer M50S make per day in USD?

It depends on network difficulty and the Bitcoin price. The live FPPS estimate at the top of this page is recalculated automatically for the variant you select.

What is the daily power usage of an M50S?

A 126 TH/s M50S at about 3276 W uses roughly 79 kWh per day. Multiply by your price per kWh to get the daily energy cost.

How do I change the pool on many Whatsminers at once?

Use WhatsMinerTool: scan your IP range, select the miners, enter the RuPool stratum URL from this page, set the worker as subaccount.worker with any password and apply. For a single unit the web interface works the same way.

Where do I find Whatsminer error codes?

The current error code appears in the web interface and in WhatsMinerTool, and MicroBT's documentation explains each code. Most errors point to power, temperature, fans, network or a hashboard; check the simple causes before assuming a repair.

M50S vs Antminer S19k Pro: which is more efficient?

The S19k Pro is rated around 23 J/TH, slightly better than the M50S at around 26 J/TH. The M50S has an integrated PSU and a single power cord, which some operators find simpler to deploy.

Connect Whatsminer M50S to RuPool

Sign up — your cabinet opens a step-by-step guide: create a subaccount, set a payout address and enter the stratum address in the miner.

Daily payouts, 1% FPPS fee, 24/7 support.

Start mining